How to Use the Auto Steam Iron for Wrinkle-Free Results

Quick answer

For wrinkle-free results with your Russell Hobbs Auto Steam Iron, fill the tank, select the right temperature and steam setting for your fabric, and use smooth, steady strokes. Avoid common mistakes like overfilling or ironing dry fabrics.

Step-by-step: Using your Auto Steam Iron for wrinkle-free clothes

1. Fill the water tank correctly: Unplug the iron and open the water fill cover. Fill the tank with clean tap water up to the MAX mark (320ml). Do not overfill—excess water can leak through the soleplate and cause water spots on clothes. Always check the water level before each use; never fill above the MAX line.
2. Set the temperature and steam level: Plug in the iron and turn the temperature dial to match your fabric (e.g., cotton, synthetic, or denim). Wait for the soleplate to heat up (the indicator light turns off). Then adjust the steam control: use low steam for delicates, high steam for cottons and linens. Using too high a steam setting on a low temperature can cause spitting or water leaks. Match steam to fabric type.
3. Iron with steady strokes and use the steam shot: Place the iron on the fabric and glide it in straight, overlapping strokes. For stubborn creases, press the steam shot button (130g/min) while moving the iron. Avoid stopping on one spot—it can scorch the fabric or leave a mark. Keep the iron moving; the steam shot works best on vertical or hanging fabrics for deep creases.
4. Empty the tank and store properly: After ironing, unplug the iron and let it cool completely. Pour out any remaining water from the tank to prevent mineral buildup or mold. Wipe the soleplate with a damp cloth if needed. Store the iron upright on its heel rest. Leaving water in the tank can clog the steam vents over time; always empty it after each use.

Product facts

• Auto Steam Iron: The Russell Hobbs Auto Steam Iron delivers 45g/min continuous steam and a 130g/min steam shot, with a 320ml water tank. The continuous steam keeps fabrics damp for easier wrinkle removal, while the steam shot targets tough creases on denim or heavy cottons without needing to re-wet the garment.