How to Fit the Water Filter in Your Adventure Kettle

Quick answer

To fit the water filter in your Adventure Kettle, first remove the old filter from the spout, then press the new replacement filter firmly into place until it clicks. This takes under a minute.

Step-by-step fitting guide

1. 1. Remove the old filter: Open the kettle lid and locate the mesh filter inside the spout. Gently pull it out from the top. It may be clipped in; use a slight twisting motion if needed. Don't force it – if it's stuck, rinse the area with warm water first to loosen any limescale.
2. 2. Prepare the new filter: Take the new replacement filter out of its packaging. Rinse it briefly under cold water to remove any loose particles from manufacturing. Do not use soap or detergent – just water.
3. 3. Insert the new filter: Align the filter with the slot inside the spout. Press it down firmly until it clicks into place. It should sit flush and not wobble. If it doesn't click, remove it and re-align – the filter is not reversible and only fits one way.
4. 4. Test and flush: Fill the kettle with fresh water, bring it to a boil once, then discard that water. This flushes out any dust and confirms the filter is seated correctly. Do not drink the first boil water – it may contain harmless manufacturing residue.

Product facts

• Water Filter for Adventure Kettles: Replacement Water Filter for Adventure Kettles Standard Delivery £3.99, free shipping if you spend £30 or more It's an affordable, genuine part that fits perfectly, and you can save on delivery by adding it to a larger order.